GET YOUR WORKSHOP EV‑READY
EV AND HYBRID WORK, ONE STEP AT A TIME
Hybrids and EVs are already coming through New Zealand workshops. You don't need to buy everything at once. Most workshops start with safety and diagnosis, add battery testing when customers start asking about the battery, and take on battery repair later.
Below are the four steps, the equipment for each, and the price where we list one. Prices exclude GST.
STEP 1
WORK SAFELY ON HIGH VOLTAGE
Before anyone works near a hybrid or EV high-voltage system, they need insulated tools and a way to prove the system is safe.
- EV Insulated 84-Piece Tool Kit and Cart$5,195
- 94-Piece Insulated Cabinet and Tool KitAsk for a price
- High Voltage Torque Wrench$1,180
- Insulation Tester (Megger, CAT III)$499
- AVL HV Safety 2000$3,450
STEP 2
DIAGNOSE HYBRIDS AND EVS
Read and clear codes, run guided tests and check the high-voltage system.
STEP 3
TEST THE BATTERY
For when a customer asks "how's the battery?", or a car comes in for a pre-purchase inspection. Battery health, state of charge, cell voltages and insulation.
STEP 4
REPAIR AND HANDLE BATTERY PACKS
For workshops taking on battery repair: managing charge, lifting the pack out safely, and checking it's sealed before it goes back in.
- Launch ELP400 Lithium Battery Charge ManagerAsk for a price
- Smartsafe EP401 Lithium & NiMH Charge ManagerAsk for a price
- Launch TLT615 EV Battery Pack Lifting PlatformAsk for a price
- ELT500 EV Battery Pack Air Tightness TesterAsk for a price
- Launch PFP-150 Programming Battery Charger$1,575
ALSO: EV AIR CONDITIONING
Hybrids and EVs use electric A/C compressors that need the right oil, and the battery is often cooled through the A/C system. Our air conditioning machines handle it, with the hybrid consumables below.
Prices exclude GST. "Ask for a price" means we quote it to suit your setup.
BUILT FOR TODAY'S WORKSHOP DEMAND
Modern workshops need more than a standard scan tool to service hybrid and electric vehicles well. High-voltage systems, battery health diagnostics, safety procedures, and model coverage all add another level of complexity.
That is why AECS offers a focused range of EV and hybrid diagnostic equipment for New Zealand workshops. Whether you are building EV capability from the ground up or expanding an existing setup, we can help you find the right tools for fault finding, battery testing, workshop safety, and day-to-day diagnostic work.
WHO THIS EQUIPMENT IS FOR
Our EV and hybrid diagnostic tools are suited to a wide range of workshop environments, including:
Independent mechanical workshops
If your workshop is starting to take on more hybrid and EV work, the right diagnostic tools can help you expand your service offering with more confidence, accuracy, and safety.
Diagnostic specialists
For workshops needing deeper system access and more advanced testing capability, our EV and hybrid range supports accurate fault finding across batteries, high-voltage systems, and vehicle electronics.
Pre-purchase inspection workshops
If you carry out pre-purchase inspections or battery health checks, the right equipment can help you assess condition more thoroughly and provide greater confidence for both your workshop and your customers.
Safety-focused workshop businesses
For businesses investing in safer, more capable EV service workflows, we offer equipment that supports better high-voltage handling, stronger diagnostic capability, and improved workshop readiness.
Technicians adapting to newer vehicle technology
As vehicle technology continues to evolve, our EV and hybrid tools help technicians build confidence, improve diagnostic efficiency, and stay better equipped for modern workshop demands.
WHY CHOOSE AECS FOR EV AND HYBRID DIAGNOSTIC EQUIPMENT
At AECS, we do more than supply workshop equipment — we use it, support it, and stand behind it. With more than 20 years in the industry, we understand what Kiwi workshops need and only supply equipment we genuinely believe in.
Built for real workshop use
We supply EV and hybrid tools with practical workshop application in mind, so you can choose equipment that supports the jobs you actually do.
Local NZ support
When you invest in diagnostic equipment, support matters. AECS helps workshops across New Zealand with product advice, setup support, and ongoing assistance.
Help choosing the right setup
Not every workshop needs the same EV tool kit. We can help you choose the right starting point based on your vehicle mix, service offering, and budget.
A smarter path into EV capability
Whether you want a strong entry-level setup or a more advanced battery diagnostics solution, AECS helps you build capability in stages without overcommitting too early.
BLACKFERN MEMBERS: BUY NOW, PAY LATER
Purchase these products through your Blackfern Co-Operative account with 3, 6 or 12 months deferred payments and simplified monthly billing.
MTF Finance Masterton
Finance available to AECS customers nationwide
Personal and business finance through MTF Finance Masterton, with same-day approval. Apply online from anywhere in NZ. Responsible lending criteria apply. See mtf.co.nz/terms.
FAQS
What tools do I need to start working on EVs and hybrids?
That depends on the work you want to carry out. Some workshops begin with a capable EV-compatible scan tool, then add battery testing and safety equipment as demand grows. AECS can help you build the right setup for your workshop.
Can I use a standard scan tool on EVs and hybrids?
Some standard scan tools offer limited hybrid and EV coverage, but deeper battery and high-voltage diagnostics often require more specialised equipment.
Do I need insulated tools for EV work?
If your team is working around high-voltage systems, the right safety equipment is essential. Insulated tools, gloves, testers, and correct procedures all play an important role in safer workshop practice.
Can AECS help me choose the right EV diagnostic equipment?
Yes. If you are unsure where to start, we can recommend the right combination of scan tools, battery diagnostic equipment, and workshop safety tools based on the vehicles you service and the type of work you want to offer.
Do you offer support after purchase?
Yes. AECS supports workshops with product guidance and practical help, so you can get more value from your equipment and use it with confidence.
NEED HELP CHOOSING THE RIGHT EV AND HYBRID DIAGNOSTIC TOOLS FOR YOUR WORKSHOP?
Talk to AECS about the best-fit setup for your team, whether you need an entry point into EV servicing or a more advanced battery diagnostics solution.
CONTACT AECS EQUIPMENT
sales@aecs.co.nz
0800 673 034
Mon - Fri, 8am - 5pm
AECS Equipment
20 Whangaehu Valley Road
Masterton 5886
Wellington, New Zealand
